Power

The TITAN® 4X4 is powered by the Scania DC16 Tier 4F / EU Stage 4 engine rated at 500 KW (670 HP) combined with a Twin Disc Transmission / Transfer Case / Power Divider for superior acceleration, pumping performance and reliability.

Control

Tubular frame rails form the backbone for a variable rate coil spring v-link suspension. Disc brakes with 432 mm (17 inch) rotors are standard and provided with dual calipers on each front wheel end.

Storage

Equipped with an unmatched total of 10.2 m3 (360 feet3) storage including a full transverse compartment

Knockdown

Equipped with a power divider driven single stage pump that flows in excess of 7570 lpm (2000 gpm), foam proportioning with patented ECOLOGIC® calibration system, and multiple high flow turret configurations including the low attack high flow RHINOTM II bumper turret

Payload

Payload capacity with 6000 liters (1,585 gallons) of water, 840 liters (225 gallons) of foam and 250 kg (550 lbs.) of auxiliary agent

TITAN® 4X4 ARFF

The new TITAN® has an all-welded aluminum extrusion cab with 4.76 mm (3/16 inch) exterior plate. With over 7.4 sq m (80 square feet) of glass plus an ergonomic “cockpit style” layout, the new TITAN has exceptional firefighting and operational functionality.
The new TITAN® cab has been designed and tested to meet SAE2420, SAE2422 and ECE-R29 structural standards with roof loading test withstanding an incredible 28,576 kg (63,000 pounds) – twice the requirement.
Located in a separate plumbing module for easy access and maintenance, the single stage pump flows in excess of 7570 lpm (2000 gpm)
Featuring a lifetime warranty and with a 25.4mm (1 inch) wall thickness, the polypropylene water tank has a 6,000 liters (1585 gallons) capacity with an 850 liter (225 gallons) integral foam cell
Unsurpassed equipment storage with four (4) compartments located on each side to provide a minimum of 10.2 m³ (360 ft³) of usable storage capacity
Large “swing out” style rear engine access doors for ease of service and maintenance.

Features

?>

Standard

Extruded aluminum roll cage cab design featuring an ergonomic layout of all firefighting and operational functions
6000 liter (1585 gallons) polypropylene water tank with integral 840 liter (225 gallons) foam tank.
Fire Research AutoFoam ATP automatic foam proportioning system
Hale 8FG pump
Standard disc brakes offer unsurpassed performance – exceeding Federal Motor Vehicle Safety Standards (FMVSS 121)
Stainless steel plumbing
Enclosed pump module allows for the most efficient flow characteristics and ease of service and maintenance
Unsurpassed equipment storage space with four (4) compartments located on each side
State-of-the-art Weldon™ V-MUX® multiplex electrical system for superior reliability and ease of maintenance
Multiple hose reel and pre-connected hand line configurations available

Optional

High Reach Extendable Turret (HRET) up to 16.5m (54 ft.) elevation
Auxiliary hydraulic power units up to 10KW @ 240V
Dry Chemical Systems up to 250 kgs. (550 lbs.)
AkrochemTM turret nozzles for greater dry chemical reach and penetration
Patented ECOLOGIC® vehicle integrated foam testing and calibration system to test solution percentage without discharging foam
DEVS and FLIR® camera packages for limited visibility conditions
Rhino® II high volume low attack bumper turret
Winterization system for -40 degrees F/C extreme climates
Light towers and scene / quartz lighting options for night operations
Water / foam and/or complimentary agent hose reels mounted behind the cab for rapid deployment